The Social Network for Professional Concrete Artisans.
-
dave schoeppner
- Magnolia, OH
- United States
- Share
- Blog Posts
- Discussions (26)
- Events
- Groups
- Photos (3)
- Photo Albums
- Videos
dave schoeppner's Discussions
stained glass in what color concrete?
well i finally poured this sink. i took the advice of hand packing a base coat on everything. then i filled the bottom up 1 1/2" thick and vibrated it. i did use the hat mold then and made a pretty w…
Replied 59 minutes ago
sink drain tapered knockout
wasn't sure if one of these would do it? http://www.acehardwareoutlet.com/%2800mjcw4510 - dave
Replied Dec 2
dave schoeppner's Page
Latest Activity
well i finally poured this sink. i took the advice of hand packing a base coat on everything. then i filled the bottom up 1 1/2" thick and vibrated it. i did use the hat mold then and made a pretty wet mix with some fibers and filled the it full. i…
good info, thanks!
Hey Dave,
We make our master molds out of either foam or MDF, which we then turn into fiberglass mold parts. If you're looking to make a mold and use it repeatedly, you might consider turning your original into a fiberglass copy first. A lot of the…
wasn't sure if one of these would do it?
http://www.acehardwareoutlet.com/%2800mjcw4510tuidy0rzfqkhmi%29/productDetails.aspx?SKU=4025045
thanks - dave
BT:
Did you get any takers on your offer to sell your DVD? If not I may be interested in buying it from you.
Thanks
Steve.
also, its not a bad idea to let the grout cure a little longer than usual, especially if you are wet grinding/polishing. If it is too soft and you start popping out pieces of sand or stone you will have to start grouting over again, or even leave ni…
nice, thanks alot! - dave
Yeah add some sand to the mix it will be fine. We sometimes add 10 to 20% sand or whatever fill to the cement depending on the voids that are left.
i pulled a form on a countertop (wetcast) and there were some "dime"-size spots on the surface where the creamy top kinda peeled off on the form. i wanted to lightly grind it to expose some aggregates and i was wondering if there were anyway to get…
Just got it. It was helpful but if you're handy you can probably figure it out just by watching the you tubes. I'm looking to sell mine if you're interested?
BT
801-691-3302
Get it.
Watch it.
Do it.
The dvd is well worth it, I still watch my dvd, its great if you've had a long span between projects.
Great starter video! teaches you all of the basics. Brock and I learned from the video then made minor changes with mix design and forming methods we had already been using. get it!
Ten Thumbs up on the videos. (wife says i am all thumbs)
I have the "GFRC" DVD and " Fabric Mold" DVD. Both are in A one shape as I only watched it once and figured I would take a course next year directly from Gore or Ralston.
Profile Information
- Membership requires that you enter your real First and Last name.
- dave schoeppner
dave schoeppner's Photos
Comment Wall (2 comments)
Rob Roth© 2009 Created by Dave McVey
