The Social Network for Professional Concrete Artisans.

Broadcast Color on Countertop

First time post. I am in the middle of making our countertop and broadcasted the color and it is still coming off. The counter is beautiful and very minor blemishes. I do not want to grind but need some sanding ( I was thinking 200 grit but when does it end 1200? 800?) Since it is is a broadcasted it may present a problem. Anyone have this issue? Also, the color color hardener) is still coming off the surface. Do I wash it off? We are planning to use a wax sealer. Is this the best choice?

Tags: broadcast, color, hardener, sealing

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dave McVey on November 10, 2009 at 8:08am: Do you have a pic? You casted this in place and broadcast the color on top correct? Wax alone is not the best sealer.; ▶ Reply to This

Permalink Reply by Laura Padilla on November 12, 2009 at 7:21pm: That was what I was afraid of. I think the mix was to dry. Can I use a sealer then the wax? Any recommendation on the sealer? I will take better pictures and post after the sun shines.; ▶ Reply to This

Permalink Reply by Laura Padilla on November 12, 2009 at 9:21pm: It was cast in place and boadcaster.

Dave McVey said:
Do you have a pic? You casted this in place and broadcast the color on top correct? Wax alone is not the best sealer.; ▶ Reply to This

Broadcast Color on Countertop

Replies to This Discussion

Support